Volume 27(1981)
Volume 27, Number 1 (1981)
Original Articles
Ryushi KITAHARA, Juichi TSUTSUMI, Tsutomu MATSUMOTO
Observations on Cell Wall Response and Mechanical Behaviour in Wood Subjected to Repeated Static Bending Load 1
Shin SHIMIZU, Motoaki OKUMA
Fundamental Studies on the Strength of the Oriented Particleboard I. On the bonding strength between wood particles 8
Hiroyuki IKEGIWA, Hikoichi SUGIHARA
Noise Field Produced by Woodworking Machinery II. In the case of a semi-anechoic test room 14
Hiroyuki IKEGIWA, Hikoichi SUGIHARA
Noise Field Produced by Woodworking Machinery III. Influence of reflctive hard floor of the semi-anechoic test room 22
Hiroyuki INOUE, Minoru MORI
Cutting Efficiency in Oblique Cutting of Wood Parallel to the Grain Effect of bias angle on edge wear 25
Terutaka NAKAGAMI, Tokuo YOKOTA
The Characteristics of Copolymers Isolated from Reaction Products between Methacrylated Wood and Styrene 32
Hidetoshi KUTSUKI, Mikio SHIMADA, Takayoshi HIGUCHI
The Role of O-Methyltransferase in the Formation of Lignin and Lignans in the Genus Thuja 39
Akio NOZAWA, Seiichi SATONAKA
The Evolution of Hydrogen Cyanide from Wood Treated with Diammonium Phosphate during Pyrolysis or Combustion 49
Yutaka KIYOMIZU, Tamio KONDO
Effect of Addition of Rice-bran on Edible Mushroom Cultivation 54
Proceedings of the Society 59
Volume 27, Number 2 (1981)
Original Articles
Kiyoyasu YAMADA
Studies on JIS-Z 2141 Method of Abrasion Test for Wood I. Modification and supplement of the standard for more progress of its reliability 61
Kiyoyasu YAMADA
Studies on JIS-Z 2141 Method of Abrasion Test for Wood II. Analysis of experimental factor which influence on reproducibility of the test results 66
Hiroyuki IKEGIWA, Hikoichi SUGIHARA, Toshiaki TAKAGI
Noise Field Produced by Woodworking Machinery IV. In the case of the reverberant test room 71
Masayuki KOMATSU
Liquid Jet Machining of Wood I. Relationship between jet cutting conditions and the maximum cut depth 79
Terutaka NAKAGAMI, Tokuo YOKOTA
A Possible Crosslinking of the Methacrylated Wood by the Covalent Bond 87
Nam Seok CHO, Junzo NAKANO
Characteristics of Fines Produced by PFI Mill Treatment of High Yield Sulfite Pulp 98
Ryuichiro KONDO, Tamio KONDO
The Behavior of Sulfur during Kraft Pulping V. On methyl mercaptan during kraft pulping 105
Gyosuke MESHITSUKA, Junzo NAKANO
Studies on the Mechanism of Lignin Color Reaction XIV. Cross-Bevan color reaction 111
Mitsuhiko TANAHASHI, Tsutomu AOKI, Takayoshi HIGUCHI
Dehydrogenative Polymerization of Monolignols by Peroxidase and H2O2 in a Dialysis Tube III. Formation of lignin-carbohydrate complexes (LCCs) 116
Toshimi HIRATA
Pyrolysis of Cellulose Treated with Sulfamates and Boric Acid I. Changes in degree of polymerization and thermal analyses 125
Shoji OGA, Tamio KONDO
On Biotechnological Studies of Edible Mushrooms III. Promotion of growth of Lentinus edodes mycelium and antagonisms between Hypocrea sp. and Lentinus 136
Preliminary Report
Yoshihiko HIRASHIMA
Derivation of Racking Deformation Formula of Nailed Frame Panel 141
Proceedings of the Society 146
Volume 27, Number 3 (1981)
Original Articles
Tomoyuki FUJII, Hiroshi HARADA, Hiroshi SAIKI
Ultrastructure of “Amorphous Layer” in Xylem Parenchyma Cell Wall of Angiosperm Species 149
Sadaaki OHTA
The Observation of Tree Ring Structure by Soft X-ray Densitometry III. The influence of fertilization on ring structure of Pinus pinaster 157
Yutaka ISHIMARU
Adsorption of Polyethylene Glycol on Swollen Wood IV. Effects of solvent 163
Hiroshi TAKAYANAGI, Katsuhiro MATSUO
Racking Strength of Nailed Walls Sheathed with Particleboard 170
Masayuki KOMATSU
Liquid Jet Machining of Wood II. Effects of cutting conditions on the amount of liquid retention in wood 179
Kazuo HAYASHI, Shiro KIMURA, Misato NOMURA
Cutting with Helical Cutters III. Effect of helix angle on the feature of machined surface 185
Masami NOGUCHI, Toshihiro OKABE, Hisashi TANAKA
Polishing of Wood with Tokusa (Equisetum hiemale L. var. japonicum Milde.) III. Observations of Tokusa and surfaces of specimens polished with Tokusa through a scanning electron microscope 191
Hideo KAWAKAMI, Kenzoh TANEDA, Shigeo ISHIDA, Jun OHTANI
Observation of the Polymer in Wood-Polymer Composite II. On the polymer location in WPC prepared with methacrylic esters and the relationship between the polymer location and the properties of the composites 197
Ryuichiro KONDO, Tamio KONDO
The Behavior of Sulfur during Kraft Pulping VI. On the incorporation of methyl mercaptan into the kraft lignin 205
Kenji TATSUMI, Noritsugu TERASHIMA
Oxidative Degradation of Lignin III. Oxidation of kraft black liquor with hydrogen peroxide under UV irradiation 210
Seiichi YASUDA, Noritsugu TERASHIMA, Takeshi ITO
Chemical Structures of Sulfuric Acid Lignin II. Chemical structures of condensation products from arylglycerol-β-aryl ether type structures 216
Takeshi KATAYAMA, Fumiaki NAKATSUBO, Takayoshi HIGUCHI
Syntheses of Arylglycerol-β-Aryl Ethers 223
Kazunari INABA, Yoshitomi IIZUKA, Tetsuo KOSHIJIMA
Acceleration of the Growth of Basidomycetes by the Sulfite Waste Component 231
Note
Wu Rong PERNG, Toshio TAJIMA
The Packing Density of Wood 237
Proceedings of the Society 246
Volume 27, Number 4 (1981)
Original Articles
Keiji TAKABE, Minoru FUJITA, Hiroshi HARADA, Hiroshi SAIKI
The Deposition of Cell Wall Components in Differentiating Tracheids of Sugi 249
Yoshiaki HATTORI, Yasushi KANAGAWA, Shin TERAZAWA
Liquid-tension Collapse of Cells in Concentrated Polymer Solution 256
Masami FUSHITANI
Effect of Ions on Thermally Stimulated Current in Wood Electret 263
Yasutoshi SASAKI, Takashi OKUYAMA, Yoji KIKATA
Determination of the Residual Stress in a Cylinder of Inhomogeneous Anisotropic Material I. 270
Yasutoshi SASAKI, Takashi OKUYAMA, Yoji KIKATA
Determination of the Residual Stress in a Cylinder of Inhomogeneous Anisotropic Material II. 277
Zainal MUTTAQIN, Tomio TAKEMURA
Effects of Size on Flexural Properties of Glued-Laminated Jelutong Beams. A case of comparatively uniform distribution of laminae 283
Reiichi AMEMIYA, Tsuneo AOYAMA, Toshiro TOCHIGI
Cutting Force of a Single Saw Tooth I. Cutting force of a single swage set tooth 290
Yoshihiko SHINODA, Ken KANNO, Toshio TAJIMA
Bleaching of Kraft Pulp with Chlorine IV. Effect of cooking temperature on the formation of coloring materials of low bleachability 296
Yoshito OHTANI, Masashi SUMIMOTO
Studies on Pitch Troubles Caused by Pulping and Bleaching of Tropical Wood X. Colored specks formed on a sheet of the bleached sulfate pulps from Rengas wood 3. 302
Byung-Ho YOON, Noritsugu TERASHIMA, Seiichi YASUDA
Chromophoric Structures of Alkali Lignin V. Degradation and subsequent oxidation reactions of phenylcoumaran structure 311
Toshimi HIRATA, Yasuo FUKUI, Saburo UESUGI, Hiroshi ABE
Combustion Properties of Wood Treated with Chemicals I. Surface flammability and smoke evolution 318
Hiroki IWAHARA, Tomotaka YOSHIMOTO, Toshiro FUKUZUMI
Change in Activities of Extracellular Enzymes during Life Cycle of the Edible Mushroom, Pleurotus ostreatus 331
Note
Minoru FUJITA, Keiji TAKABE, Hiroshi HARADA
Autoradiographic Investigations of Cell Wall Development III. Method of quantitative and chemical analyses of light microscopic autoradiography adapted to a series of semi-thin sections 337
Proceedings of the Society 342
Volume 27, Number 5 (1981)
Original Articles
Kyoji KISHI, Hiroshi HARADA, Hiroshi SAIKI
The Structure of Cell Walls in the Pit Border Regions of Hardwood Vessels 343
Takashi OKUYAMA, Yasutoshi SASAKI, Yoji KIKATA, Nobuo KAWAI
The Seasonal Change in Growth Stress in the Tree Trunk 350
Wu Rong PERNG
Studies on Flow in Wood V. Air flow and effective pit openings in spruce wood 356
Mitsumasa MORI, Masami FUSHITANI, Masao SATOH
Analysis of Bending-creep Fracture of Wood in the Radial-section Loading by the Theory of the Stochastic Process 363
Hidetoshi MIYAKAWA, Minoru MORI
Impact Properties of Wood and Wood Based Materials VII. Impact bending fatigue of wooden beams with a semi-circular notch on the tensile side 372
Takuoki HISADA
Creep and Set Behaviour of Wood Related to Kiln Drying V. Effect of temperature on creep of wood during drying 381
Takuoki HISADA
Creep and Set Behaviour of Wood Related to Kiln Drying VI. Effect of drying rate on creep of wood during drying 390
Masaharu SUZUKI
Physical Characteristics of Multilayer Particleboard 397
Jiro KAWAMURA
Studies on the Cracking of Paint Films on Wood III. Film elongation at break and the occurrence of cracks in film on hardwood during early stages of service conditions 403
Osamu SAWABE, Kadzuo MORI
Effects of Treatment with Sodium Hydroxide on Pore Structure in Holocellulose 409
Hiroshi ARAKI, Noritsugu TERASHIMA
Radiotracer Experiments on Lignin Reactions VII. The origins of low molecular weight compounds formed during kraft cooking 414
Toshimi HIRATA, Yasuo FUKUI, Saburo UESUGI, Hiroshi ABE
Combustion Properties of Wood Treated with Chemicals II. Changes in the concentration of some gases and the relationships among combustion factors 419
Saburo UESUGI, Yasuo FUKUI, Hiroshi ABE
Combustive Gas Toxicity Test for Wood Treated with Chemicals 428
Proceedings of the Society 437
Volume 27, Number 6 (1981)
original Articles
Kenjiro FUJISAKI
Studies on the Branch Wood of Sugi (Cryptomeria japonica D. Don) VI. On the relationship between the radial growth curves of branches and Stems 443
Wu Rong PERNG
Studies on Flow in Wood VI. Air flow and effective openings in hardwoods 449
Nobuo SOBUE, Yoshio IWASAKI
Effect of Veneer Construction on Anisotropy of Dynamic Viscoelasticity of Plywood 457
Shin SHIMIZU, Motoaki OKUMA
Fundamental Studies on the Strength of Oriented Particleboard II. On the stress transmitting circuit produced in the board while being subjected to a tensile force 463
Kinji SHIMADA
Organic Compounds in Kraft Bleaching Spent Liquors IV. Toxicity bioassay of organic compounds from beech kraft bleach effluents 470
Seiichi YASUDA, Kazunori HAYASHI, Takeshi ITO, Noritsugu TERASHIMA
Chemical Structures of Hydrochloric Acid Lignin I. Chemical structures of condensation products from monolignols 478
Takeshi ITO, Noritsugu TERASHIMA, Seiichi YASUDA
Chemical Structures of Sulfuric Acid Lignin III. Reaction of arylglycerol-β-aryl ether with five percent sulfuric acid 484
Masahiro SAMEJIMA, Tomotaka YOSHIMOTO
General Aspects of Phenolic Extractives from Coniferous Barks 491
Katsuji ISHIBASHI, Kazuhiko NIIKAWA, Yoshio NODA, Hideo HOSODA, Akira IKEHATA
Production of Activated Carbon from Tropical Plants I. Production of powdered carbon by the fluidized bed method 498
Notes
Ikuo FURUKAWA, Emiko MATSUMOTO, Tomoyasu SAKUNO, Jun KISHIMOTO
Wood Quality of Small Hardwoods I. Within-tree variation of fiber length in Konara (Quercus serrata Thunb.) and Kunugi (Q. acutissima Carr.) 507
Toshiro TOCHIGI, Yukuo ABE, Hisashi KAWASAKI, Chiaki TADOKORO
Deflagration Characteristics of Wood Residues in the Production of Substitutive Energy 512
Hidetoshi KUTSUKI, Fumiaki NAKATSUBO, Takayoshi HIGUCHI
A New Synthesis of Coniferaldehyde 520
Hidenobu KANEKO, Chiyoko TAKATSUKA, Junzo NAKANO
Effect of Trace Amounts of Dioxane in Lignin on the Determination of the Methoxyl Group 523
Proceedings of the Society 526
Volume 27, Number 7 (1981)
Original Articles
Nobuhiro IMAYAMA
The Temperature-change Caused by a Static Load Applied to Wood I. The temperature-change caused by a compressive load 529
Nobuhiro IMAYAMA
The Temperature-change Caused by a Static Load Applied to Wood II. The temperature change caused by a tensile load 535
Chohachiro NAGASAWA, Yaomi KUMAGAI, Masataka ONO
Fatigue Test of Adhesive-bonded Joints under Repeated Stress of Constant Deflection 541
Chohachiro NAGASAWA, Yaomi KUMAGAI, Masataka ONO
Outdoor Exposure Durability Testing of Adhesive Joints under Stress 548
Toshiro TOCHIGI, Hisashi KAWASAKI, Daikuro HAYASHI
Studies on a Construction Material Using a Rotary-Peeled Veneer – a Rolled-Veneer Column (RVC) I. Patterns of the gluing pressure system in the RVC processing machine 556
Akinori YAMASHITA
Studies on the Mechanism of Orthogonal Cutting of Wood with a Japanese Plane V. The prevention of torn grain by a horizontal mouth opening 566
Takao YOSHIMATSU, Naoharu KINOSHITA
Studies on Wood Cutting by a NC Router I. Effects of working conditions on defects in the machining process 572
Hirokuni ONO, Bunichiro TOMITA, Hiroshi MIZUMACHI
Amino-alkyd Resin Coatings III. Viscoelastic properties of coating films cured with methylated melamine resins 579
Hirokuni ONO, Bunichiro TOMITA, Hiroshi MIZUMACHI
Amino-alkyd Resin Coatings IV. Relationship between curing rate and properties of methylated melamine resins as crosslinking agents 585
Shiryo YAGA
On the Termite Resistance of Okinawan Timbers VII. Termiticidal substance from the bark of Adina racemosa MIQ. and its derivatives 592
Notes
Nobuo SOBUE, Yoshio IWASAKI
Effect of Adhesives on Dynamic Viscoelasticity of Laminated Lumber of Two-ply Sawn Laminae 597
Ryuichiro KONDO, Tamio KONDO
The Behavior of Sulfur during Kraft Pulping VII. KMnO4-HCl treatment of Mäule’s color reaction and volatile organic sulfur compounds 602
Masahiro SAMEJIMA, Tomotaka YOSHIMOTO
The Relationship of Proanthocyanidins to the Bark Tannins of Conifers 606
Proceedings of the Society 610
Volume 27, Number 8 (1981)
Original Articles
Hisao NISHIMURA, Takeshi OKANO, Ikuo ASANO
Fine Structure of Wood Cell Walls I. Structural features of noncrystalline substances in wood cell walls 611
Naoaki SHIBATA, Hiroshi HARADA, Hiroshi SAIKI
Development and Structure of Traumatic Tyloses in Quercus serrata Thunb. I. Development of traumatic tyloses in various boring seasons 618
Sadaharu MIO, Tsutomu MATSUMOTO
Intercellular Spaces in the Axial Parenchyma of Hardwoods 626
Chohachiro NAGASAWA, Yaomi KUMAGAI, Masataka ONO
Effect of Overlap Length on the Fatigue Properties of Adhesive-bonded Joints 633
Kaoru BANSHOYA, Minoru MORI
Tool Life in Machine Boring of Wood and Wood Based Materials II. Effects of both the tool and work materials 640
Mitsuyoshi YATAGAI, Toshio TAKAHASHI
Hydroborations of Abietic and Levopimaric Acids 649
Notes
Koetsu TAKAHASHI
Heartwood Phenols and Their Significance to Color in Cryptomeria japonica D. Don. 654
Masahiro SAMEJIMA, Tomotaka YOSHIMOTO
High Performance Liquid Chromatography of Proanthocyanidins and Related Compounds 658
Proceedings of the Society 663
Volume 27, Number 9 (1981)
Original Articles
Naohiro KURODA, Juichi TSUTSUMI
Effect of Moisture Content and Temperature on Frequency Dependence of Conductivity of Wood 665
Zhung Zheng LEE, Gyosuke MESHITSUKA, Nam Seok CHO, Junzo NAKANO
Characteristics of Milled Wood Lignins Isolated with Different Milling Times 671
Hidenobu KANEKO, Shuji HOSOYA, Junzo NAKANO
Degradation of Lignin with Ozone. Reactions of biphenyl and α-carbonyl type model compounds with ozone 678
Tadakazu HIROI
Enzymatic Hydrolysis of Woods VI. Susceptibility of rotted-woods to cellulase from Trichoderma viride 684
Kiyoharu FUKUDA, Shin-ya TABE, Takafusa HARAGUCHI
Action of Microfungi on Wood I. Relationship between the wood-decomposing ability and secretion of cellulase, xylanase, and so forth 691
Tae OKI, Hiroyuki WATANABE, Hisao ISHIKAWA
The Biodegradation of Lignin by Shiitake Lentinus edodes (Berk.) Sing 696
Note
Nobuyuki HIRAI, Tamotsu MAEKAWA, Yoji NISHIMURA, Satohiro YAMANO
The Effect of Temperature on the Bending Creep of Wood 703
Proceedings of the Society 707
Volume 27, Number 10 (1981)
Original Articles
Hisao NISHIMURA, Takeshi OKANO, Ikuo ASANO
Fine Structure of Wood Cell Walls II. Crystallite size and several peak positions of X-ray diagram of Cellulose I 709
Naoto ANDO, Hideo SUGIYAMA
Strength Properties of Stressed-skin Panels Under Bending and Compression Loads 716
Takashi NAKAI, Yoshio HATAYAMA
Compression Tests on Full-size 2 by 4 Studs Relationship between knot-area ratio and strength ratio 723
Masami NOGUCHI, Kohji MURATA, Naokimi YAMADA
Ripsawing with Thin Eccentric Circular Saws The effect of eccentricity on feed force 731
Toshimi HIRATA
PyTolysis of Cellulose Treated with Sulfamates and Boric Acid II. Weight loss with isothermal heating 737
Jong Yoon LEE, Nam Seok CHO, Atsushi ISHIZU, Junzo NAKANO
Studies on the Xylans of Tropical Hardwoods 745
Preliminary Report
Yuji MATSUMOTO, Atsushi ISHIZU, Junzo NAKANO
Estimation of Glyceraldehyde-2-Aryl Ether Type Structure in Lignin by the Use of Ozonolysis 750
Proceedings of the Society 752
Volume 27, Number 11 (1981)
Original Articles
Keiko YOSHIMURA, Takao ITOH, Ken SHIMAJI
Studies on the Improvement of the Pinning Method for Marking Xylem Growth II. Pursuit of the time sequence of abnormal tissue formation in loblolly pine 755
Shigeki YATA, Junsuke MUKUDAI, Hiromu KAJITA
Morphological Studies on the Movement of Substances into the Cell Wall of Wood III. Diffusion of zinc compounds into the cell wall 761
Takeo HAISHI
Basic Modes of Water Absorption by Woods II. Parabolic diffusion model for bound water absorption 767
Satoshi SHIDA, Motoaki OKUMA
The Effect of the Apparent Specific Gravity on Thermal Conductivity of Particleboard 775
Fujiichi SAITO, Endang SASTRADIMADJA, Yuji MIYATA
Effect of Swelling under Mechanical Restraint on the Internal Bond of Particleboards 782
Toru EBIHARA
Shear Properties of Laminated-veneer Lumber (LVL) 788
Hideyuki YOKOCHI, Hisashi FUKUI
Face Milling of Wood III. Consideration of chip formation by the peripheral cutting edge 795
Atsushi SAWATARI
On the Distribution of Mesyl Groups Introduced into Pulp Fibres by Means of the XPS Technique 804
Proceedings of the Society 811
Volume 27, Number 12 (1981)
Original Articles
Keiji TAKABE, Minoru FUJITA, Hiroshi HARADA, Hiroshi SAIKI
Lignification Process of Japanese Black Pine (Pinus Thunbergii Parl.) Tracheids 813
Shigeki YATA, Junsuke MUKUDAI, Hiromu KAJITA
Morphological Studies on the Movement of Substances into the Cell Wall of Wood IV. Diffusion of hexavalent chromium into the cell wall 821
Fukumi MAKI, Misato NORIMOTO, Tadashi YAMADA
Relationship between Humidity Conditions and the Nature of Interior Wall Materials III. 828
Akira TAKAHASHI, Chiaki TANAKA, Yozo SHIOTA
Solid-borne Noise from Wood-joist Floors and Floating-floor Variation of the Traditional Japanese Wooden-house Construction 833
Yoshihiko HIRASHIMA, Noriyuki KANAYA, Yoshio HATAYAMA, Fumio KAMIYA
The Performance of Wooden Frames with Bracings for Horizontal Shearing Force and Their Structural Analyses I. Racking tests of wooden frames 845
Yoshihiko HIRASHIMA, Noriyuki KANAYA, Yoshio HATAYAMA, Fumio KAMIYA
The Performance of Wooden Frames with Bracings for Horizontal Shearing Force and Their Structural Analyses II. Structural analyses of wooden frames 855
Shigeru SUGIYAMA, Fumio MATSUO
Effects of Cutting Velocity on Cutting Phenomenon, Cutting Force, and Frictional Coefficient in Orthogonal Cutting of Wood 863
Kenji TATSUMI, Noritsugu TERASHIMA
Oxidative Degradation of Lignin IV. Reactivities of monomeric lignin model compounds with hydrogen peroxide 873
Seiichi YASUDA, Noritsugu TERASHIMA, Takeshi ITO
Chemical Structures of Sulfuric Acid Lignin IV. Reaction of arylglycerol-β-aryl ether with seventy-two percent sulfuric acid 879
Masaaki KUWAHARA, Hideyuki TAKEGAMI, Mizuyo YONEHANA, Tetsuo SATO, Shojiro IWAHARA
Metabolism of Vanillic Acid in Fusarium Species 885
Hiromi TANAKA, Goro FUSE
Succession and Interaction of Microorganisms Participating in Wood Decay II. Species and frequency of isolation of fungi from a stake test under the floor of a house 893
Proceedings of the Society 902