Volume 2 (1956)
Volume 2, Number 1 (1956)
Hikoichi SUGIHARA
Studies on the Sawing with Bandsaw-Blade. IV. Clearance Angle and Pitch. 1
Katsumi OKUSA, Shozo HAYASHI
Shrinking and Swelling of Wood under Stress. I. Compressive Stress. 5
Mutsumi IWASHITA, Masahiro TANIBUCHI
On the Non-Uniformity in the Internal Fan Type Drykiln, Particularly on Influence of Air Velocity Distribution. 8
Hiroshi KITAMURA
Studies on the Shrinkage of Important Timbers. I. Abies firma SIEB. et ZUCC. from Gunma Prefecture. 13
Nobuyuki EDAMATSU, Yutaka OHIRA
Sharpening Method of the Swaged Tooth on a Bandsaw Blade 19
Yoshitsugu KIMURA, Fumiyuki TERATANI
Studies on Pulp and Paper Making. XIII. The Properties of the Half-Bleached Pulps Cooking with Sodium Sulphite and Sodium Sulphide. 24
Yoshitsugu KIMURA, Akitoshi KITANO
Studies on Pulp and Paper Making. XIV. Effect of the Chemical Degradation of Pulp on the Strength of the Test Sheet. 28
Takayoshi HIGUCHI, Ichiji KAWAMURA, Ikuji HAYASHI
Biochemical Study of Wood-Rotting Fungi. V. The Enzymatic Oxidation of Lignin. 31
Yoshiyasu YAMAGISHI
Water Repellency, Water Absorption and Moisture Adsorption of Wood Treated with Synthetic Organosilicone Compounds. 36
Yasushi SUZUKI
Shrinkage of Wood in Kiln Drying. 43
Takeshi UYEMURA
The Effects of Thickness of Wood Materials on the Electrical Moisture Meter Reading. 49
Proceedings of the Society 53
Volume 2, Number 2 (1956)
Hiroshi KITAMURA
Studies on the Shrinkage of Important Timbers. II. Tsuga Sieboldii CARR. from Gunma Prefecture. 55
Hisashi FUKUI
The Influence of Clearance Degree of Hollow-Ground Ripsaw on the Sawing Action. I. The Relation between Clearance and Side Friction. 60
Yoshio SAITO, Nobuyuki EDAMATSU, Yutaka OHIRA
The Effect of Tooth Bite on the Cutting Forces in Ripsawing. 65
Hirao SHIMAZONO, Shoshiro MATSUOKA
The Variation of the Moisture Content and the Weight Loss of Wood in the Decay Durability Test. 69
Takeshi SADOH, Sigeru KADITA
Studies on the Relations between Physical Properties and Chemical Components of Wood. I. On the Determination of the Crystallinity and Accessibility of Polysaccharides in Wood. 73
Daikuro HAYASHI
Studies on the Relation between Moisture Content and Cutting of Wood. I. On the Wood Cutting of the Circular Saw Bench. 76
Yoji KIKATA
Studies on Wood Sanding. I. 79
Teruo GOTO, Sigeru KADITA
Studies on the Impregnated Woods. IX. Relation between the Moisture Content at Time of Cure of Phenol Resin-Impregnated Wood and the Dimensional Stability. 85
Takuzo TUTUMOTO
Studies on the Cause and Control of End Waviness and Split during Drying of Veneer. 88
Proceedings of the Society 92
Volume 2, Number 3 (1956)
Susumu MIZUMOTO
Studies on Lenzites abietina FR. and Some of Its Allied Species. VII. Effect of Creosote upon the Mycelial Growth and Decay of Beech Ties. 95
Hikoichi SUGIHARA, Kazuo SUMIYA
A Consideration on the Power Requirements for No Load Running and Starting of Bandsaw Machine. 99
Ikuo ASANO
Studies on the Collapse in Wood. II. 104
Hisashi FUKUI, Shinji HIRAI, Yoji KIKATA
Studies on Laminated Woods with Sawn Boards. IV. On the Strength of Glued End Joints within Laminations in Laminated Columns of Cryptomeria japonica D. DON. 108
Seihachi OGATA
Recherches historiques sur la méthode expérimentale de la dureté du bois au Japon. 114
Yaichi KOBAYASHI
Some New Data on the Anatomical Characters of Softwoods. 119
Sigeharu KOIDE, Yoshimasa EGUSA
A Study on Power Consumed for Rotary Veneer Cuttings. III. 121
Takashi KANDA, Hidekuni KAWAKAMI
Polarography of Thiolignin. I. On the Catalytic Wave in Cobalt Buffer Solution. 124
Takamaro MAKU, Hikaru SASAKI, Ryozo HAMADA
The Effect of Paraffin Emulsion on the Hygroscopic, Swelling, and Mechanical Properties of Chipboard. 130
Abstracts
Proceedings of the Society 136
Volume 2, Number 4 (1956)
Hiroshi KITAMURA
Studies on the Shrinkage of Important Timbers. III. Pinus pentaphylla MAYR from Gunma Prefecture. 137
Takamaro MAKU, Hikaru SASAKI, Ryozo HAMADA
Mechanical Properties of Chipboard Made of Flat Flake Particles. 142
Jiro TANAKA, Tamio KONDO
On the Screenings of Sulfite Pulp. III. On the Nitrobenze Oxidation Products. 145
Eiichi TANIGUCHI
Chemical Studies on the Crystalline Region of Cellulosic Materials. XII. Deformation of Fine Structure in Pulps by Hot Water- and Heat-Treatment, and Subdivision of Crystalline Region as One Criterion of Pulp Quality. 148
Eiichi TANIGUCHI
Chemical Studies on the Crystalline Region of Cellulosic Materials. XIV. Variations of Fine Structure. XIV. Akamatsu (Pinus densiflora SIEB. et ZUCC.) and Mosochiku (Phyllostachys edulis RIV.) through Growth. 152
Koichi NISHIMOTO, Goro FUSE, Yoshiyuki INOUE
Studies on the Wood Preservatives. XX. The Improvement of the Penetration of Natrium-Pentachlorphenate. 158
Hisao ISHIKAWA, Katsumi TAKAITI
Studies on Lignin. XX. On the Dissociatable Group in Lignin. 162
Manjiro FUKUYAMA, Shigeru KADITA
Studies on the Drying of Plywood. 168
Abstracts
Proceedings of the Society 176
Volume 2, Number 5 (1956)
Daikuro HAYASHI, Riutaro SUZUKI
An Experiment on Wood-Sawing of Hand Saw. 177
Osamu DOI, Shigeru KIKUKAWA, Isamu SAITO, Hikoichi SUGIHARA, Shozo TANIJIRI
Studies on Sawing with Double-Edge Cutting Bandsaw. I. A Theory of the Running Stability of Double-Edge Cutting Bandsaw Blade. 179
Osamu DOI, Shigeru KIKUKAWA, Isamu SAITO, Hikoichi SUGIHARA, Shozo TANIJIRI
Studies on Sawing with Double-Edge Cutting Bandsaw. II. An Experimental Study on the Running Stability of Double-Edge Cutting Bandsaw Blade. 184
Jiro KOHARA, Hajime OKAMOTO
Studies of Japanese Old Timbers. XIX. The Four Types of Old Wood. 191
Jiro KOHARA
Studies of Japanese Old Timbers. XX. Chemical Analysis of Unearthed Wood. 195
Jiro KOHARA, Hajime OKAMOTO, Yorio SHIGEMATSU
Studies of Japanese Old Timbers. XXI. Analysis of Heat Treated Wood Compared with Old Timbers (Part 2). 200
Kamekichi YAZAWA, Kazumi FUKAZAWA
Studies on the Relation between Physical Properties and Growth Condition for Planted SUGI (Cryptomeria japonica D. DON) in Central District of Japan. I. On the Distribution of Moisture Content. 204
Makoto MIYA ZAKI, Moritami YASUE
Studies on Natural Resins. I. On the Isolation of Palustric Acid from Oleoresin of Pinus densiflora. 210
Abstracts
Proceedings of the Society 214
Volume 2, Number 6 (1956)
Shitomo MAMADA
Studies on the Impact Withdrawal Resistance of Nail in Wood. I. 217
Tamio KONDO, Hiroyuki ITO, Motoshige SUDA
On the Heartwood Components of Juglans Sieboldiana MAXIM. 221
Takayoshi HIGUCHI, Ichiji KAWAMURA
Biosynthesis of Syringoylmethylketone from Syringaldehyde during Fermentation 223
Takayoshi HIGUCHI, Ichiji KAWAMURA, Yoshimi ITO
On the Formation of Lignin in Bamboo-Shoot. VII. Ethanolysis Products of Bamboo. 226
Minoru SAWADA
A Test Method of POTSSON’s Ratio of Wood. 233
Takesi SADOH, Sigeru KADITA
Studies on the Relations between Physical Properties and Chemical Components of Wood. II. On the Ability of Moisture Adsorption of Hemicellulose and Cellulose. 237
Shinji HIRAI, Yoshiyasu YAMAGISHI
Veneering of Chipboard. 241
Abstracts
Proceedings of the Society 248